DJI A2 - Manual (Page 47)

©2013-2014 DJI. All Rights Reserved. 47
2. Every time you run the DJI Assistant App, the App will search the Controller Unit automatically.
3. The gain value displayed on Mobile Device and PC may be a little different, that is OK for use.
Step 3 Flying Test Procedures
1. Get the aircraft ready, run the DJI Assistant and make sure it is connected with the main controller. (The
indicators on the DJI Assistant are )
2. Start the motors.
3. The “View” page shows the relative parameters real-time when flying.
4. Go to the “Basic” and click into the “Gain” page to set the values of all gains real-time during flying.
5. Go to the “Basic” and click into the “Tool” page to view the values of IMU & Compass real-time during
flying.
6. Finish the flying and land your aircraft.
Only the parameter referred above can be changed during flying. Others can be configured after
landing.