Appendix, Indicator descriptions, Led indicator descriptions – DJI A2 User Manual

Page 48: Low voltage alert, Errors, Ioc recording, Bluetooth, Failsafe mode

Appendix

LED indicator descriptions

Control mode

GPS signal

Manual Mode: No indicator

Best (

> 6): No indicator

ATTI. Mode:

(1) (sticks not in mid-point (2))

Good (

= 6):

(1)

GPS ATTI. Mode:

(1) (sticks not in mid-point

(2))

Bad (

= 5) :

(2)

Ground Station:

(1)

Worst (

< 5):

(3)

Flight Attitude

Attitude good: No indicator

Attitude status bad:

(3)

IMU data lost, calibrate IMU needed

： (4)

Compass calibration

Horizontal calibration

(∝)

Calibration Failed

(∝)

Vertical calibration

(∝)

Abnormal Compass Data

(∝)

Low voltage alert

First level alert

(∝)

Second level alert

(∝)

FailSafe mode

During the FailSafe

(∝)

Compass Abnormal after power on

(∝)

Errors

System Error

(4)

Compass Abnormal after power on

(∝)

IOC Recording

Record home-point successfully

(20)

Aircraft is in the 8m range of HP

(6)

Record forward direction successfully

(20)

Record a Point Of Interest successfully

(20)

Bluetooth

A2 Assistant is connected / disconnected to the flight control system

(∝)

When the LED blinks

(3), please hover or land the aircraft and wait for the white LED to go off.

When the LED blinks

(3), it is not recommended to fly.

When the LED blinks

(4), please contact your dealer.