DJI A2 User Manual

Page 46

Supported iOS devices

iPhone 4s, iPhone 5, iPhone 5s, iPod Touch 5, iPad 3, iPad 4, iPad air, iPad mini,

iOS6.1 or above is required. Bluetooth version is required to be 4.0 or above.

Required versions of DJI Assistant App & Firmware

Require DJI Assistant App version 1.1.14 or above and the firmware of A2 Controller Unit version 2.1 or above, as

well as the firmware of LED-BT-I module version 2.0 or above.

Specifications

Bluetooth version

4.0

Environment temperature

-10

℃~+50℃

Communication distance

50m

Consumption

240mw(0.04A@6V)

DJI Assistant App Usage

Step 1 Download and installation

Search the DJI Assistant in App store on mobile device and install it.

Step 2 Connect the A2 Controller Unit and the DJI Assistant App

Prepare an iOS device supported 4.0 Bluetooth, and then enable the Bluetooth function on the mobile

device.

Power on the transmitter and the A2 Flight Control System, make sure the Bluetooth Status Indicator is

solid Red

Run the DJI Assistant App. You may be asked to register through internet when first login (the account of

PC Assistant software is OK for login); follow the tips to set Main Controller name and password.

Observe the indicators

on the left bottom of the software. (

connection indicator and

communication indicator) On the DJI Assistant App, if the communication indicator is , please double

check the connections and driver installation; otherwise if the indicator is blinking

, go to next step.

Select the “Basic” option. Please follow step-by-step for your first-time-configuration. Basic configuration

is necessary. Click the icon

to get the configuration details.

You can click the “Advanced” option for more parameter settings. Advanced setting is optional. There are

Motor, F/S, IOC, Gimbal, Voltage, Limits, Gear, etc.

Check all parameters in the View page.

Select “More” to obtain more details. Including: Restore MC default settings, Accounts, Main Controller

List, Information, wiki, Rate DJI Assistant, FAQ, Feedback, About.

Make sure to upgrade the LED-BT-I module to the latest firmware via the PC Assistant software

on a PC before you use the DJI Assistant App with the A2 Flight Control System.