Bully Dog 4038x Sensor Docking Station - Manual (Page 7)

6
Sensor Docking Station
Power Harness
The power harness connects the Sensor Docking Station to
the fuse box and the battery and chassis grounds in your
vehicle. For more information about installing the power
harness, see page 14.
O
2
Sensor Cable
NOTE: This part is only included with 40385. The O
2
Sensor
cable connects a Bosch oxygen sensor (see page10) to the
Sensor Docking Station . The single plug end connects to the
OXYGEN port on the Sensor Docking Station. The end of the
cable with two ports connects to the sensor(s). (See page
36 for more information and a wiring diagram.)
grounD wires
Power hArness PLug
Power wire