Bully Dog 4038x Sensor Docking Station - Manual (Page 33)

32
Sensor Docking Station
Temperature Sensor Wiring
There is only one opening for the auxiliary temperature
sensor docking port. The +5V OUT dock supports a 0-5 volt
temperature sensor.
The ground wire on a typical two-wire temperature sensor
should be connected to the same chassis ground that you
used for the power harness.
The diagram below illustrates the wiring configuration for a
two-wire temperature sensor.
1. Signal out from the sensor (0-5 volt).
2. Ground (must go to the same chassis ground location as the Sensor
Docking Station chassis ground).