Bully Dog 4038x Sensor Docking Station - Manual (Page 25)

24
Sensor Docking Station
Heavy Duty
Display Bully Dog Pyro on Main Screen:
You may have to change the main screen to show at least two
gauges. To do this, hold down the bottom left button until the
screen shows the gauge arrangement that you prefer.
1. Press the lower left button to highlight the gauge spot
where you want to display the Bully Dog pyrometer
temperature.
2. Use the buttons on the right to scroll until BD Pyro 1 (or 2)
is shown.
The gauge that you have changed will remain highlighted until
the Main Screen arrangement is changed or the GT/WatchDog
is restarted.
°F 0
BD Pyro 2
°F 0
Speed
0
Throttle
0 MPH %
BD Pyro 1