Bully Dog 32306 Jeep JK 11+ - Manual

i
32306: Jeep JK 11+
Existing Trim Removal
1. First remove the trim following
the step by step instructions
below.
2. Remove Torx screws from the
visor mounting bracket with
the T20 Torx bit.
3. Pull upper visor trim down/off.
4. Pull off the stock A-pillar.
5. You should now have exposed the corner
frame of your Jeep where you can install
the Bully Dog custom gauge pod mount.
Most custom gauge pods come in black.
Consider before beginning installation
that the custom gauge pod can be
painted to match the color of the
vehicle interior. The custom gauge
pod is made from ABS plastic and can
be painted with spray paint found at
auto parts stores.