Bully Dog 4038x Sensor Docking Station - Manual (Page 26)

25
Sensor Docking Station
Pyrometer Setup: Heavy Duty (continued)
Use the Bully Dog Pyrometer for Warning Levels:
You can use the Bully Dog pyrometers in addition to (or
instead of) the factory installed pyrometers for the temperature
warnings on your GT or WatchDog.
1. Choose Vehicle Setup or Vehicle Settings from the Main
Menu.
2. Choose Set Warning Levels from the Vehicle Settings
menu.
3. Use the buttons on the right
to scroll through the options
and highlight BD Pyro 1 (or
2) Temp. Level.
4. Press the bottom left button
to select the option you
have highlighted.
5. Use the buttons on the right
to scroll through the different values and select the
temperature that you want for the Warning Level.
• The current setting will be displayed on
the left side of the screen.
• If you do not want to use the Bully Dog
pyrometer for the Warning Level option
with your GT or WatchDog, scroll all the
way up and highlight OFF.
6. Press the bottom left button to SELECT the value that you
have highlighted.
• If you want to leave this screen without changing the
current setting, press the top left button to Go Back. (You
will have to press the button more than once to return to
the Main Screen.)
WARNING MENU Go Back
Select
DOWN
BD Pyro 1 Temp. Level
BD Pyro 2 Temp. Level
Setting: 1250 ˚F
Setting: OFF
Speed Limit UP
Setting: 68 MPH
Go Back
to Main Menu
BD PYRO 1
Selected
Selected Levels
DOWN
UP
1175
1200
1225
1275
1250 ˚F
1250
SELECT