Bully Dog 4038x Sensor Docking Station - Manual (Page 24)

23
Sensor Docking Station
Pyrometer Setup
There are two options for the pyrometer setting: factory or BD
(Bully Dog) pyro. All GTs and Watchdogs have the factory pyro
selected as a default setting and are only available for 2007.5
and newer. You will need to change this setting to have the GT
or WatchDog display the temperature readings from the Bully
Dog pyrometer and Sensor Docking Station.
Light Duty
Gas GT:
1. Choose Vehicle Settings from the Main Menu.
2. Choose Select Pyro Source from the Vehicle Setup
menu.
3. Highlight Bully Dog Pyros by pressing the left side button
next to it.
4. Press the top left button to Go Back. (You will need to
press it more than once to get back to the Main Screen.)
WatchDog and Diesel GT:
1. Choose Vehicle Setup from the Main Menu.
2. Choose Select Pyro Source from the Vehicle Setup
menu.
3. Highlight Bully Dog Pyros (or Pyro Kit) by pressing the
left side button next to it.
4. Press the top left button to Go Back. (You will need to
press it more than once to get back to the Main Screen.)
Go Back
to Main Menu
VEHICLE SETUP
Select Pyro Source
Set Defuel Levels
Adjust Economy Display
Adjust Speed Display