Brandmotion FDMC-1260 - Manual (Page 2)

INSTALLATION
INSTRUCTIONS
1260 Instructions 6-26-14.docx Page 2 of 5
Step 1: Remove rubber tray liner from front
storage tray.
Step 2: Use a Phillips Screwdriver to remove
(2) Phillips screws.
Step 3: Use a Plastic Trim Removal Tool to
remove chrome surround trim.
Step 4: Use a Plastic Trim Removal Tool to
remove upper console trim.
Step 5: Cut out provided template and mark
location for 1/2” hole.
Step 6: Drill 1/2” hole through rubber mat
and upper console trim.