Brandmotion FDMC-1220 - Manual (Page 2)

INSTALLATION
INSTRUCTIONS
1220 Instructions 6-26-14.docx Page 2 of 5
Step 1: Use a Plastic Trim Removal Tool to
remove left and right side console soft trim.
Step 2: Use a Plastic Trim Removal Tool to
remove trim around shifter.
Step 3: Use a Plastic Trim Removal Tool to
remove trim behind shifter.
Step 4: Use a Plastic Trim Removal Tool to
remove I/P trim around center stack.
Step 5: Use a Plastic Trim Removal Tool to
remove left and right side console lower trim.
Step 6: Use a Plastic Trim Removal Tool to
loosen and move rearward cup holder trim.