Brandmotion FDMC-1271 - Manual (Page 2)

INSTALLATION
INSTRUCTIONS
1271 Instructions 9-11-14.doc Page 2 of 4
Step 1: Use a Plastic Trim Removal Tool to
remove left and right side console bin trim.
Step 2: Use 7mm Nut Driver to remove the
(4) 7mm nuts.
Step 3: Slide Plastic Trim Removal Tool under
floor of bin to help slide out
Step 4: Pull out storage bin and disconnect
Power Point and LED Connectors to
completely remove bin.
Step 5: Cut out provided template, place on
bottom of bin and mark ½ hole location.
Step 6: Drill 1/2” hole in marked location.