Brandmotion FDMC-1240 - Manual (Page 3)

INSTALLATION
INSTRUCTIONS
1240 Instructions 6-26-14.docx Page 3 of 4
Step 7: Pull out and remove console storage
bin.
Step 8: Disconnect power point and USB
plugs to remove storage bin from vehicle.
Step 9: Cut out provided template and mark
locations for (4) 3/16” holes with a center
punch/scribe tool.
Step 10: Mark location for 1/2" hole.
Step 11: Drill 1/2” hole and (4) 3/16” holes
in previous marked locations.
Step 12: Place Freedom Charge Module in
console storage bin.