Bird Technologies 3171B020 - Manual (Page 33)

21
Figure 11 Replacing Fuse for External DC Input Voltage
Meter Replacement
If the meters should become defective and require replacement, proceed as outlined in the following steps:
1. Observe the connections of the meter leads.
2. Disconnect the leads.
Note: This will insure the correct polarity in reassembly.
3. Loosen the clamp screw on the sides of the meter until the clamp is released.
4. Withdraw the meter through the front panel.
5. Reverse the above steps to install the new meter.
Storing
If the unit is not to be used for an extended period of time, store in a cool dry place where it will be free from rough
treatment, dust, and dampness.
Repackaging
Should you need to return the Wattcher unit, use the original shipping package if possible. If the original package is
not available, use a heavy duty corrugated box with shock-absorbing material around all sides of the unit to provide
firm cushion and to prevent movement in container. Container should be properly sealed.
4-40x3/16
Phillips Pan
Head Screws
Cover
4-40x3/16
Phillips Pan
Head Screws
Fuse 3AG Fast Acting .5 A