Bang & Olufsen BeoPlayer - User Guide - Manual (Page 43)

43
Default source …
When you start up BeoPlayer, the source computer is selected
automatically per default. You may want to change this setting,
if you do not want to listen to sound from your computer.
> Check ‘PC’ to select the computer as your default setting,
or …
> … check ‘None’ to make BeoPlayer start up without any
source being active.
BeoPort USB box …
Along with each software update comes software for the
BeoPort box. The update-firmware-key checks if you have the
latest version of the software (from the Internet or a CD-rom)
installed in the BeoPort box.
> Click ‘Update firmware’.
> Follow the instructions on the screen.
Link frequency …
In order to receive sound and pictures from your video system,
you must tune in the particular channel number on which this
signal is distributed. For certain Bang & Olufsen systems, the
link frequency is found automatically.
You can adjust the link frequency manually even in a Bang &
Olufsen system which supports automatic search.
> Check the option ‘Manual’ before clicking ‘Find’.
The on-screen instructions inform you whether the frequency is
found automatically. If it is, this frequency is stored.
NOTE: The US version of BeoPlayer/BeoPort does not support
transmission of video sources from the main room to the
computer.