Bang & Olufsen BeoPlayer - User Guide - Manual (Page 42)

42
Option programming
If your computer is part of a BeoLink setup (with BeoPort or
BeoMaster 5) you may need to programme it to the correct
Option. Consult your Bang & Olufsen retailer for further
information.
Main computer
It is possible to have several BeoPorts set up in a BeoLink
system, but you can only distribute N.MUSIC and N.RADIO
from the main computer. To indicate which computer is the
distributor of e.g. N.MUSIC, you must indicate under ‘Main PC’,
whether the computer is the main, or secondary computer.
> Check the ‘Yes’ button to indicate a main computer, or …
> … check the ‘No’ button to indicate a secondary computer.
Play Timer
Control a ‘Timer’ to make it play an audio or video source,
if your computer is part of a BeoLink setup. This function is
useful if you want a wake-up ‘Timer’ to play from an audio
system, or if you want to watch the news every night directly
on your computer screen.
You can also select the source ‘Standby’, to make your sources
switch off automatically at a specific time every night.
Note that all settings for ‘Timer’ programming must be set
on the connected source (e.g. your audio system or your
television).
> Check ‘ON’ to activate the Play Timer, or…
> … check ‘OFF’ to deactivate the Play Timer.
Mix sound
Sound from any available Master Link source can be mixed
with the sound from your computer. If you want to listen
to a CD and sounds from a computer game simultaneously,
set mixed sound to ‘ON’ to listen to both sounds from your
speakers.
The Advanced settings – This only
applies if BeoPort is part of your
setup