Ambient Lockit Slate, ACN-LS - Manual (Page 9)

experience quality. ACN-LS
www.ambient.de/en
7
6. Attaching the Handle:
First, bring the small lever into „up“ position.
The slate module has holes which recess upwards. The
fittings of the handle are inserted into the holes so the
edge of the handle has a gap to the module on the lower
side.
Now push the handle upwards so the lower edge
is flush with the chassis, and the fittings are held
in the smaller section of the holes. Next, tilt back
the lever so the handle is tightly anchored in the
chassis of the display module.