Sys menu, Sys>config, Sys>config>display – Ambient Lockit Slate, ACN-LS User Manual

Page 20: Sys>config>usb, Acn-ls

ACN-LS

SYS MENU

The SYS menu serves to configure various
parameters, the display behavior, USB port mode
(USB: COM or MTC) and battery type are set. Push the
config switch to enter.

SYS>CONFIG

Enter the configuration by pushing in the config
switch
Navigate to DISPLAY, USB or BAT, push the config
switch to select.

SYS>CONFIG>DISPLAY

Adjust display brightness from 1 to 10 toggling the
config switch left/right. Push in to select value.
The curser will jump to the Auto-off settings:
Select after what time the display shuts off after
entering the main operation display.
Choices are:
Never – 5 seconds – 30 seconds – 1 minute – 5
minutes.

Select by toggling the config switch left/right. Push in to select value.

SYS>CONFIG>USB

Select the function of the USB connection:
MTC: this is the default, will be recognized as generic
MIDI interface and deliver or receive time code as
MIDI time code.

COM: select to communicate with computer, for updating software or transferring ACN data.
This mode will appear as a HID in the control panel.
Select by toggling the config switch left/right. Push in to select mode.