Ambient Lockit - ACL 204 - Manual (Page 13)

11 www.ambient.de
GEN > UB
In the GEN > user bit menu, the user bits are being
displayed. The user bits can be edited manually, and
the jam behavior managed.
JamUB
Under JamUB, the jamming behavior is managed:
normal: the user bits are being taken from external
time code
manual: the user bits are not being overwritten by
external time code. This mode is to be used if you want
a custom entry, like date and camera Id for instance.
insert: user bits can be inserted “on the fly”. Note: if
the source time code was unplugged for more than 3 seconds and reconnected, the ACL 204 will re-
jam. For just inserting changed user bits after interrupted time code, you must also set the ACL 204
to “jam once” or “off” in the jamTC menu.
Edit-UB
In Edit-UB, the user bits can be edited manually.
Decrease or increase by toggling left/right. Holding
left/right is fast backward/ forward. Push to select
value, curser jumps to next digit.
After finishing, selecting the new value needs to be
confirmed – “use new”, or the menu can be left by
cancelling – “use old”.
EXIT
As the user bits are only displayed in this menu, we
added a way to exit without any changes quickly.