beautypg.com

Chapter 1, Introduction, Before you begin – Rockwell Automation Direct Drive Technology Demonstration Machine User Manual

Page 7: What you need, Introduction before you begin what you need, Chapter

background image

7

Publication PMC-QS002B-EN-P - October 2008

7

Chapter

1

Install the Direct Drive Technology
Demonstration Machine

Introduction

In this chapter, you will install Direct Drive Technology Demonstration
Machine.

Before You Begin

• The packing material can be saved for use when the machine is

returned.

• Choose an installation location that is within 2 m (6.5 ft) of power

mains and meets the environmental and power specification for
the machine.

• The machine and the boxed contents of the shipping crate should

be brought to the location of the installation.

What You Need

• Utility knife or snip for cutting tie wraps.
• Hex wrench set and an adjustable crescent wrench. These tools

were shipped with the machine.

• Additional tie wraps have been included. Use them to repack the

machine.

Topic

Page

Before You Begin

7

What You Need

7

Follow These Steps

8

Position and Level Machine

8

Remove Shipping Clamps

9

Install Signs

12

Assemble Computer and Computer Stand

13

Make Connections

14

Preparing the Direct Drive Technology Demonstration Machine for
Shipment

14