Assemble computer and computer stand, Assemble, Computer and – Rockwell Automation Direct Drive Technology Demonstration Machine User Manual

Page 13: Computer, Stand

Publication PMC-QS002B-EN-P - October 2008

Install the Direct Drive Technology Demonstration Machine Chapter 1

Assemble Computer and
Computer Stand

1. Insert the uncapped end of pole in wheel base.

2. Loosen the 4M BHCS on the back of the computer monitor and

slide into the keyholes of the Centris bracket and tighten all four
screw.

3. Attach the swing arm keyboard assembly on to the post of the

pole clamp.

Wheel Base

50 mm (2 in.) Pole

Centris Bracket

M4 BHCS (X4)

Swing Arm

Keyboard Tray

Assy

Pole Clamp