Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 57)

Monitoring and Editing Drive Parameters 6-5
If you change the control type parameter on drives that have control types (for
example, vector or volts/hertz for GV3000 drives), a message is displayed that
reminds you that changing the control type resets the parameters to their default
values. The software prompts you to continue. If you select Yes to continue, then:
• The drive is reset.
• The monitor list is changed so that only parameters for that control type are
displayed.
• All parameters are set to default value.
If the parameter: The dialog box looks like this: Do the following:
can be set to any
value within a range Enter the value in the box or
change the value by using the
scroll bar.
has limited options Click the arrow and select from
the options.
be set through the
options or by
selecting a value
within a range Click the arrow and select from
the options, or enter the value in
the box.