Rockwell Automation CS3000 V6.1 MMI FlexPak, GV 3000, Liqui-Flo - Manual (Page 21)

Getting Started 2-7
If you want to establish communication, but the CS3000 software is not connecting to
the drive:
• Make sure power to the drive is on.
• See section 2.3, Setting Up Communication Between the CS3000 Software
and the Drive.
2.5 About the Menus and Toolbars
Use the menus and toolbar to navigate through the software as described in the
following sections.
2.5.1 About the Menus
Table 2.1 explains the CS3000 software functions you can access through the menu.
Table 2.1 – Overview of the Menu
Use this menu: To:
File Access and manage configuration files
Drive • Connect to and disconnect from the drive
• Select a drive
• Control the drive
• View drive status and alarms
• Use the PC Scope
• Set parameters in the drive to the default values
• Save drive parameter values to the drive’s non-volatile
memory (for drives that support this option)
• Restore values from the drive’s non-volatile memory to its
run-time memory (for drives that support this option)
• Tune GV3000 or Liqui-Flo drives (vector regulation only)
Config • Edit a configuration file
• Enter a description for a configuration file
• Upload or download a configuration file
• Compare a configuration file
Option Choose the COM port on the personal computer which is being
used to connect to the drive.
Help Access the online help.