Change the memory blade holder – Rockwell Automation 1797-Series ControlNet Ex Media Plannng Installation Manual User Manual

Page 79

Text mode
Original mode

Publication CNET-IN003A-EN-P - January 2006

Adjust the Cable Strip Tool B-5

Change the Memory Blade
Holder

You received two memory blade holders with your cable strip tool;
one is for PVC-CL2 cable, and the other is for plenum FEP-CL2P cable.
You need to install the appropriate memory blade holder for the type
of cable you are stripping (PVC or FEP).

1. Lift the latches on the memory blade holder and swing it back.

2. Snap the memory blade holder off the rod and

remove it from the strip tool.

3. Position the appropriate memory blade holder on the rod and

snap the holder into place.

4. Swing the memory blade holder closed.

20182-m

20070-m

20069-m