Before you begin, Configure microsoft windows 7 professional – Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual User Manual
Page 54
54
Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 3
Configure the EWS and OWS System Elements
Before You Begin
You must have your template deployed from the USB drive to perform the
following procedures in this chapter. If you need to deploy the template, see
for details.
Configure Microsoft Windows
7 Professional
Complete these steps to configure Microsoft Windows 7 Professional settings for
the EWS and OWS workstations on your virtual machine.
1.
If the vSphere Client is not already open, on a computer with VMware
vSphere Client software installed, click Start and choose All
Programs>VMware>VMware vSphere Client.
2.
Click the Console tab.
3.
In the Organizer tree, right-click the virtual machine and choose
Power>Power On.
This window appears after initial setup is complete. This stage can take a
few minutes.