Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual - Manual (Page 32)

32 Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 2 Configure the Process Automation System Server (PASS)
Before You Begin You must have your template deployed from the USB drive to perform the
following procedures in this chapter. If you need to deploy the template, see
Chapter 1 on page 13 for details.
Configure Microsoft Windows
Server 2008 Complete these steps on a virtual machine to initiate the Microsoft Windows
Server 2008 operating system setup for the PASS server. You set your own
administration account password, computer name, and file location preference in
this procedure.
1. If the vSphere Client is not already open, on a computer with VMware
vSphere Client software installed, click Start and choose All
Programs>VMware>VMware vSphere Client.
2. Click the Console tab.
3. In the Organizer tree, right-click the virtual machine and choose
Power>Power On.