Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual - Manual (Page 44)

44 Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 2 Configure the Process Automation System Server (PASS)
Configure the FactoryTalk
Directory on the PASS The following procedure assumes the PASS is going to host the FactoryTalk
Directory. The directory server manages applications that can exist on multiple
clients and servers on separate computers on the PlantPAx system.
1. Click Start and choose All Programs>Rockwell Software>
FactoryTalk Tools>FactoryTalk Directory Configuration Wizard.
The FactoryTalk Directory Configuration Wizard appears.
2. Check the following checkboxes:
•
Configure the FactoryTalk Network Directory
• Configure the FactoryTalk Local Directory
3. Click Next.
It can take 30 seconds to process the request.
4. Type the FactoryTalk Administration Console credentials (see below) for
the network directory configuration and click Next.
IMPORTANT It is required to have a username and password with Administrator privileges
to install FactoryTalk software and to specify a FactoryTalk Directory location.
Use the same username and password for all FactoryTalk installations on the
PlantPAx system.
You must click inside the console to activate the controls for the
virtual machine.