Delete the old computer name – Rockwell Automation 9528-APPOWSENE Virtual Image Templates User Manual User Manual
Page 46
46
Rockwell Automation Publication 9528-UM001C-EN-P - March 2014
Chapter 2
Configure the Process Automation System Server (PASS)
Delete the Old Computer Name
The old computer name is embedded in the sample applications. Therefore, if
you want to use the sample applications, complete the following steps to rehost
the applications on the new computer name. You delete the old computer name
from the FactoryTalk Directory by using the Administration Console.
1.
Click Start and choose All Programs>Rockwell Software>
FactoryTalk Administration Console.
The FactoryTalk Administrator Console appears.
2.
Click Network (default) and click OK.
3.
In the Explorer window, browse to Network (THIS COMPUTER) and
click ‘+’ to expand InstantFizz.
4.
Click ‘+’ to expand FTAETag_Area.