Rockwell Automation 4100 REC Resolver to Encoder Converter Installation and Setup Manual - Manual (Page 9)

Publication 999-126 - February 1996
4 Preface
Resolver Package - An electrical mechanical device that has a single
input shaft and one or more resolver elements. The resolver elements
are geared to the input shaft.
Common Techniques Used in this
Manual The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural
steps.
• Numbered lists provide sequential steps or hierarchical
information.
• Words that you type or select appear in bold.
• When we refer you to another location, the section name appears
in italics.
•
• Important:Identifies information that is critical for successful
application and understanding of the product.
REC Product Receiving and
Storage Responsibility You, the customer, are responsible for thoroughly inspecting the
equipment before accepting the shipment from the freight company.
Check the item(s) you receive against your purchase order. If any
items are obviously damaged, it is your responsibility to refuse
delivery until the freight agent has noted the damage on the freight
bill. Should you discover any concealed damage during unpacking,
you are responsible for notifying the freight agent. Leave the shipping
container intact and request that the freight agent make a visual
inspection of the equipment.
Leave the product in its shipping container prior to installation. If you
are not going to use the equipment for a period of time, store it:
• in a clean, dry location
• within an ambient temperature range of 0 to 85° C (32 to 185° F)
• within a relative humidity range of 5% to 95%, non-condensing
• in an area where it cannot be exposed to a corrosive atmosphere
• in a non-construction area
!
ATTENTION: The exclamation point inside of a
triangle, followed by the word “ATTENTION”
indicate circumstances that can lead to personal
injury, death, property damage or economic loss.