Super io configuration – Rockwell Automation 6189x Integrated Display Industrial Computers User Manual User Manual
Page 72

72
Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014
Chapter 5
UEFI Set-up Utility
Super IO Configuration
Table 2 - Serial Port 1 Configuration
Table 3 - Serial Port 2 Configuration
Parameter
(1)
(1) See
for an explanation of common buttons near the bottom of screen.
Description
Super IO Chip
Displays the Super IO chipset information.
Serial Port 1 Configuration
Scroll to this item to set parameters for the serial port 1.
Serial Port 2 Configuration
Scroll to this item to set parameters for the serial port 2.
Parameter
Description
Serial Port
Enables or disables the serial (COM1) port.
Options: Enabled (default) or Disabled
Device Settings
Displays the serial port’s Base I/O address and IRQ setting.
Change Settings
Select an optimal setting for the super IO device.
Options: Auto (default), IO=3F8h; IRQ=4, IO=2F8h; IRQ=4, IO=3E8h; IRQ=4,
IO=2E8h; IRQ=4
Parameter
Description
Serial Port
Enables or disables the serial (COM2) port.
Options: Enabled (default) or Disabled
Device Settings
Displays the serial port’s Base I/O address and IRQ setting.
Change Settings
Select an optimal setting for the super IO device.
Options: Auto (default), IO=2F8h; IRQ=3, IO=3F8h; IRQ=3, IO=3E8h; IRQ=3,
IO=2E8h; IRQ=3