Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 43)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 43
Chapter
4
Component Replacement
Chapter Objectives This chapter provides information on the following topics:
•
Accessories and Replacement Parts
•
Voltage Precautions
•
Electrostatic Discharge Precautions
•
Pre-configuration
•
Post-configuration
•
Required Tools
•
Remove the Cover
•
Reinstall the Cover
•
CompactFlash Card
•
Drive Precautions
•
Replace a Drive
•
Replace or Add Memory Modules
•
Replace the RTC Battery
•
Replace the Power Supply Unit
Accessories and Replacement
Parts You can view a list of accessories and replacement parts at the following Rockwell
Automation website:
http://ab.rockwellautomation.com/Computers .
Review the specifications of a new component before installing it to make sure it
is compatible with the computer. Record the model and serial number, and any
other pertinent information of new components for future reference.
Voltage Precautions The computers contain line voltages. Disconnect all power to the computer
before you install or remove components.
IMPORTANT We recommend that you use only Allen-Bradley approved accessories and
replacement parts.
SHOCK HAZARD: Disconnect all power to the computer before removing
components.
Failure to disconnect power can result in severe electrical shock to an individual or
electrostatic discharge (ESD) damage to the computer and components.