Byte order configuration, Digital filter – Rockwell Automation 1797-IE8NF FLEX Ex 8 Input Analog, HART and Noise Filter Module User Manual
Page 26
26 FLEX Ex 8 Input Analog, HART, and Noise Filter Analog Modules
Publication
1797-5.5 - September 2011
Byte Order Configuration
Byte Order
Group B
Byte Order
Group A
Description
(1)
Bit 9 Bit 8 Bit 1 Bit 0
0
0
0
0
Little Endian Format (Default) = All data entries in true Little
Endian format.
1
0
1
0
Word Swap = Word swap only values requiring more then one
word,
for example: 32 bit float values.
0
1
0
1
Byte Swap (reserved for future implementation) = Byte swap all
words in data table.
1
1
1
1
Big Endian Format (reserved for future implementation) = All data
entries in true Big Endian format.
(1)
All other combinations are invalid. Values will Revert to the last valid configuration (in case of original
start-up this would be default configuration) and set module Diagnostic Status to "2" configuration
failure.
Digital Filter
Digital Filter
frequency
Decimal
Value
Bits
Digital Filter
frequency
Decimal
Value
Bits
2
1
0
2
1
0
10
9
8
10
9
8
0.5 Hz
7
0
0
0
10 Hz
3
1
0
0
1 Hz
6
0
0
1
Not applicable
(1)
2
1
0
1
2 Hz
5
0
1
0
Not applicable
1
1
1
0
4 Hz
4
0
1
1
Not applicable
0
1
1
1
(1)
Decimal Values 2, 1 and 0 are not applicable. Values will Revert to the last valid configuration (in case
of original start-up this would be default configuration) and set module Diagnostic Status to "2"
configuration failure.