Rockwell Automation 2080-LC50 Micro800 Controllers: Getting Started with CIP Client Messaging - Manual (Page 24)

18 Rockwell Automation Publication 2080-QS002A-EN-E - April 2013
Chapter 2 Use CIP Symbolic Client Messaging
6. Add ReadValue contact to the
rung by selecting Direct Contact
from the Toolbox and drag it
onto the rung as shown.
7. Add MSG_CIPSYMBOLIC
function block to the rung and
add the input variables as shown.
To add the function block,
double-click Block on the
Toolbox to add it to the rung.
Alternatively, you can drag and
drop Block onto the rung.
Type MSG_CIPSYMBOLIC
on the Instruction Block
Selector window that appears to
filter the function block. Choose
MSG_CIPSYMBOLIC. Then,
click OK.
8. Add ConvertData coil to the
end of the rung by selecting
Direct Coil from the Toolbox
and add it to the rung as shown.