Rockwell Automation 6180W-xxxx VersaView Workstation User Manual - Manual (Page 35)

35 Publication 6180W-UM001H-EN-P - August 2007
Chapter
4
Replace System Components
Chapter Objectives This chapter provides safety precautions and the following
procedures:
•
Remove the covers
•
Install or remove add-in cards
•
Replace the hard disk drive
•
Replace the floppy disk drive
•
Replace the CD-ROM/DVD-ROM drive
•
Replace the memory modules
Accessories and
Replacement Parts You can view a current list of accessories at the Rockwell Automation
Allen-Bradley website http://www.ab.com/versaview.
Safety Precautions The computers contain line voltages. Disconnect all power to the
computer before you install or remove system components.
Electrostatic Discharge
(ESD)
ATTENTION
Disconnect all power from the computer before removing
components. Failure to disconnect power could result in severe
electrical shock or damage to the computer.
ATTENTION
Electrostatic discharge (ESD) can damage the computer and
components. Make sure you work in a static-safe environment
and wear a grounding strap whenever handling circuit boards,
power supply, memory modules, or other internal components.