Rockwell Automation 6180W-xxxx VersaView Workstation User Manual - Manual (Page 17)

17 Publication 6180W-UM001H-EN-P - August 2007
Chapter
2
Installation
Chapter Objective This chapter describes how to install your workstation in a panel and
how to make connections to the workstation. It covers these topics:
•
European Union Compliance
•
Environment and enclosure information
•
Installation guidelines
•
Required tools
•
Mount the workstation in a panel
•
Product dimensions
•
Connect a keyboard and mouse
•
Connect the video
•
Connect ac or dc power
•
Connect to the network
European Union
Compliance This product meets the European Union Directive requirements when
installed within the European Union or EEA regions and has the CE
mark. A copy of the Declaration of Conformity is available at the
Rockwell Automation/Allen-Bradley website
http://www.ab.com/certification.
ATTENTION
The product is intended to operate in an industrial or control
room environment, which utilizes some form of power isolation
from the public low voltage mains. Some computer
configurations may not comply with the EN 61000-3-2
Harmonic Emissions standard as specified by the EMC Directive
of the European Union. Obtain permission from the local power
authority before connecting any computer configuration that
draws more than 75 watts of ac power directly from the public
mains.
ATTENTION
To comply with EN 55024, the Ethernet port LAN cable must be
less than 30 m (98.42 ft) long, and it must be used only indoors
(that is, not exit the building at any point). All other I/O cables
must be less than 3 m (9.84 ft) long, and must be used only
indoors.