Rockwell Automation 1797-ACNR15 ControlNet Ex Redundant Media Adapter - Manual (Page 31)

ControlNet Ex Redundant Media Adapter 31
Publication 1797-5.14 - March 2010
Ferrite Beads
Five ferrites come with each ControlNet Ex adapter. Four are identical and
are for use on the ControlNet Ex trunk cable as shown below (two for
Segment A and two for Segment B). The fifth ferrite is longer and you use it
on the adapter power cable.
FLEX Ex and ControlNet Ex are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Wrap the IS power input cable two
turns around the ferrite bead before
connecting the terminal block to the
adapter.
Five ferrite beads come with the
adapter. Four are short and identical.
Use these on the ControlNet Ex trunk
cable. The fifth, longer ferrite bead is
for the adapter power cable.
42206
Add ferrite beads on the ControlNet Ex
trunk cable inside the cabinet wherever
the trunk cable goes into or out of the
cabinet.
30890-M
Only Segment B is shown with
ferrites. If you use Segment A, then
add ferrites similar to Segment B.
Ferrite Beads