Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad User Manual - Manual (Page 31)

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014 31
Operation Chapter 3
5. Press the computer’s power switch.
a. Unlock the front bay access cover with the provided key (A).
b. Open the front bay access cover (B).
c. Press the power switch (C).
The computer performs certain actions every time it is started or reset. See
Restart the Computer on page 31 for what is done.
If your computer does not start or you notice other anomalies, refer to
Troubleshooting starting on
page 48 .
Restart the Computer Use either of the following methods to restart your computer:
• From the Start menu, choose Restart.
• Press CTRL+ALT+DEL on the keypad.
During a restart, the computer does the following:
• Clears the RAM.
• Starts the POST.
• Initializes peripheral devices such as drives and printers.
• Loads the operating system.
Use the computer display to view the progress of the POST, the initialization of
accessory devices, and the start-up dialogs for the operating system that is
installed.
B
A
C