Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad User Manual - Manual (Page 30)

30 Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014
Chapter 3 Operation
Keypad Function Setting The keypad for these computers has two functional settings labeled Set 1 and Set 4.
Start the Computer Follow these steps to start the computer.
1. Make sure any connected components with separate power supplies (such
as an external display) are turned on first.
2. Make sure all necessary peripheral devices are connected to the corresponding
I/O ports on the computer.
3. AC powered models: See Connect AC Power on page 26 for how to
install the AC power cord into the AC power input on the computer.
DC powered models: See Connect DC Power on page 26 for how to
install DC power to the DC power input on the computer.
4. AC powered models: Plug the AC power cord into a power source or wall
outlet.
DC powered models: Apply 18…32V DC power to the computer.
Function Setting Keypad Encoding
Set 1 DOS applications
Set 4 Default setting for Windows applications
IMPORTANT The following steps apply to when you must manually start the computer. See
Connect Power on page 25 for when power is applied to the computer for the
first time.
SHOCK HAZARD: Connect the AC power cord to a power source with an
earth ground to prevent electrical shock. Failure to do so can result in
electrical shock.