Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 52)

Serial Communication Parameters
Chapter 6
6–10
Certain terminals and computers require an
intercharacter delay to simulate the effects of
keystroke delays. Selecting an intercharacter delay
causes the characters to be sent at the slower rate
required by the device to which you are interfacing.
Scanning label GA disables intercharacter delay.
GA
No Intercharacter
Delay *
To set Intercharacter Delay to a value other than zero,
scan label GB, then two separate digits from
Appendix B. The intercharacter delay cannot
exceed 31 milliseconds.
GB
Intercharacter Delay=xx msec
+
For example, to set the delay to 15 milliseconds, scan
the GB label, then scan codes 1 and 5 in Appendix B.
Intercharacter
Delay