Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 102)

Index
I–3
P
Parameter Selection Guidelines, 4–5
Parameters
general setup, 2–3, 5–1
message format, 2–4, 7–1
serial communication, 2–3, 6–1
symbologies, 2–4, 8–1
Parity Bits, 6–3
Postamble, 7–6, 7–7
Power Consumption
continuous full power, 5–3, 10–1
standby power, 5–3, 10–1
while scanning, 10–1
Power Supply
external power supply, 4–4
Preamble, 7–6, 7–7
Prefix, 7–2
Protocols
CTS, 6–7
RTS, 6–8
XON/XOFF, 6–7
R
Resetting factory defaults, 4–10
RTS Protocol, 6–8
S
Safety Labels, 3–3
Scan Rate, 10–1
Scanner
beep, 3–7
beeper operation, 5–4
cleaning window, E–1
configuration, 4–5
description of, 3–1
factory default settings, 4–7
inspecting cables, E–1
LED Indicators, 3–2
maintenance, E–1
operating ranges, 3–4, 3–5
operation of, 3–6
parameters, 2–3
power consumption, 5–2
safety labels, 3–3
scan rate, 10–1
specifications, 10–1
troubleshooting, 3–8
visible laser diode, 3–1
Scanner Identifier, 7–4
Scanning Tips, 3–7
Serial Commands, 2–4, 9–1, F–1
command format, 9–1
examples, 9–2
Serial Communication Parameters,
2–3, 6–1
baud rate, 6–2
data bits, 6–3
intercharacter delay, 6–10
protocols, 6–7
start bit, 6–3
stop bits, 6–3
transmit buffer, 6–11