Rockwell Automation 2755-G6-D Scanner with RS-232 Option - Manual (Page 16)

Overview of Scanner
Chapter 2
2–6
Table 2.A lists the RS-232 interface cables available
for the scanners. Cables are available with different
pinouts to support either DTE or DCE configurations.
Appendix D lists the pinouts for each cable.
Table 2.A
Interface Cables with 25 Pin D-Type Connector
Catalog No. Description
2755-NCR1 RS-232 DCE, Female, 8 Foot (2.4 Meter) Coiled Cable
This cable is typically used with IBM PC compatible computers.
You may have to use an adapter with this cable if your
computer has a 9-pin port.
2755-NCR2 RS-232 DTE, Male, 8 Foot (2.4 Meter) Coiled Cable 1
This cable is compatible with the AUX port on the Single and Dual-Head
Enhanced Bar Code Decoders (Cat. No. 2755-DS1A, -DD1A). 1
Table 2.B lists other accessories for the scanners.
Table 2.B
Scanner Accessories
Catalog No. Description
2755-NS1 Scanner Holder (included with scanner).
2755-NS2 Autostand 1 1
2755-GB1 Holster Belt
2755-GH5 Scanner Holster (can function on belt or sling).
2755-PW1 5V Power Supply, 110 VAC, 60 Hz
2755-NT1 Reflective Tape, 2 inch (50.8 mm) square
92-39 2 Circular Reflector, 3 inch (76.2 mm) diameter
92-47 2 Circular Reflector, 1 1/4 inch (31.8 mm) diameter
Reflective tape is supplied with Autostand. Additional reflective
tape is available by ordering Catalog No. 2755-NT1. 1
Allen-Bradley PHOTOSWITCH

part number. 2
Scanner
Accessories