Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 75)

Publication 1734-UM015A-EN-E - November 2009
DeviceLogix Capabilities 73
Analog Inputs to Function Blocks
When the Analog Input I/O tag connector is added to the DeviceLogix editor,
the following options are available.
Network Analog Input
Network Input Word 0 through Network Input Word 7 are sent to the
DeviceLogix program through the Output Assembly. In RSLogix500, the tag
name for these words is UserDefinedWordData[0..7].
The ZIP Security Key defines a unique number that can be sent to a peer to
verify the identity and configuration of the module. The ZIP key can be
directly tied to a Network Output Word in the DeviceLogix program.
Peer#x (Word x)
There are eight groups of peer data (0…7) and 12 words within each group.
These are the eight peers and up to 24 bytes of data mapped from each peer.
You need to know the input data map from each peer to know what data to
use. See
Appendix A .