Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual - Manual (Page 50)

Publication 1788-UM052B-EN-P - April 2002
4-22 Using the NI-FBUS Configurator
Adding Tabs
To add a tab to the Block window, complete the following steps:
1. Click the Add or Delete Custom Tab button in the Block
window toolbar.
The Add & Delete Custom Tabs window opens.
2. Click the section where you want to add the tab.
3. Click Add and type the name of the new tab in the edit control
that opens.
4. Click OK to generate the new tab.
Removing Tabs
To remove a tab from the Block window, complete the following
steps:
1. Click the Add or Delete Custom Tab button in the Block
window toolbar.
The Add & Delete Custom Tabs window opens.
2. Select the name of the tab that you want to remove.
3. Click Delete.
Customizing Parameters
To customize the parameters on a Block window tab, right-click
on the tab in the Block window to display the popup menu and
select Customize Parameters.