Rockwell Automation 1788-FFCT NI-FBUS Configurator User Manual - Manual (Page 42)

Publication 1788-UM052B-EN-P - April 2002
4-14 Using the NI-FBUS Configurator
Figure 4.7 shows an example of a template.
Figure 4.7 Example Template
If template blocks are grayed out, as shown on the left in Figure 4.7,
you have not assigned a function block to the template block. To
assign a function block to the template block, complete the following
steps:
1. Double-click the template block to view all the blocks that
match this block type in your project. You can also right-click
the block and select Replace from the popup menu that opens.
2. Select the desired block from the list that opens.
Your application is not complete until you replace all the template
blocks with function blocks from your project, as shown on the Right
in Figure 4.7.