Rockwell Automation 1734-XXXX POINT I/O Digital and Analog Modules and POINTBlock I/O Modules - Manual (Page 142)

Rockwell Automation Publication 1734-UM001E-EN-P - July 2013
144 Troubleshoot with the Indicators
1734-OV2E, 1734-OV4E, and 1734-OV8E Protected Sink Output
Modules
1734-OW2 and 1734-OW4 Relay Output Modules
24VDC
Sink
Output
Module
Status
Network
Status
1734
OV8E
NODE:
0
1
2
3
4
5
6
7
Module Status
Network Status
Status of Output 0
Status of Output 1
24VDC
Sink
Output
Module
Status
Network
Status
1734
OV4E
NODE:
0
1
2
3
2
24VDC
Sink
Output
Module
Status
Network
Status
1734
OV2E
NODE:
0
1
Status of Output 0 & 4
Status of Output 1 & 5
Status of Output 2 & 6
Status of Output 3 & 7
Module Status
Network Status
Module Status
Network Status
Status of Output 0
Status of Output 1
Status of Output 2
Status of Output 3
1734-OV2E 1734-OV4E 1734-OV8E
46137 46138 46139
Indication Probable Cause Recommended Action
I/O Status
Off All outputs are inactive. None.
Yellow One or more output is active and under control. None.
Red Short circuit detected (On-state only). Remove short or overloaded circuit.
41974
Module Status
Network Status
Status of Output 0
Status of Output 1
Relay
Output
Module
Status
Network
Status
1734
OW2
NODE:
0
1
Status of Output 2
Status of Output 3
1734-OW2 1734-OW4
Relay
Output
Module
Status
Network
Status
1734
OW4
NODE:
0
1
2
3
41974
Status of Output 0
Status of Output 1
Indication Probable Cause Recommended Action
I/O Status
Off Output is off (contacts open). None.
Yellow Output is on (contacts closed). None.None.