Rockwell Automation 1775-SRx PLC-3 FAMILY PROG CONTRL - Manual (Page 16)

Step
5
Publication 1775Ć10.1 - March 1996
Configure a Personal
Computer
Configure and Connect 1770ĆT4 Programming Terminal
Set the terminal switches.
a
Set switches 4 and 5 to the UP position.
b
Remove the keyboard from the industrial terminal and locate
the switch assembly on the front of the terminal.
c
Connect terminal to processor using a 1775ĆCAT cable.
Front Panel CH0
or
1775-S4A
Module CH 5
PLC-3 Processor
25-pin Male
Connector with
Right-Angle Hood
Cat. No. 1775-CAT PLC-3
Industrial Terminal Cable (15ft.)
Industrial Terminal System
(Cat. No. 1770-T4)
Channel B