Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card - Manual (Page 71)

Run the 1784-KTx Diagnostics for DOS B-7
1784-6.5.22 - November 1999
Start Diagnostics
From the introductory screen (see page B-6), press F1.
You see the main menu:
The following instructions take you through running the diagnostic tests
individually and viewing the error log file.
7. Use the decision table below.
To: Press this key: Go to page:
Define a KTx Card to Test F2 (On-line Configuration) B-8
Run M16-diagnostics F3 (M16 Tests) B-10
Test the computer’s ability to
communicate with the KT
x card
F4 (Computer Host Tests) B-11
Run the KT x card’s self-diagnostics F5 (KTX Card Tests) B-13
Test the dual port’s ability to
communicate F7 (Dual Port Tests) B-15
Exit diagnostics F10 (Return to Previous Menu)