Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card User Manual
Rockwell Automation Equipment
Table of contents
Document Outline
- 1784- 6.5.22, 1784- KTx Communication Interface Card, User Manual
- Important User Information
- Adherence to European Union Directive Compliance
- Table of Contents
- Preface - To the Installer
- 1 - Introduction to the 1784-KTx Communication Interface Cards
- 2 - Configure the Card Hardware
- 3 - Install the Card Inside the Computer
- 4 - Connect the Interface Card
- 1784-KTX Connections
- 1784-KTS Connections
- 1784-KTXD Connections
- Before You Begin
- Connect the 1784-KTx Card to DH+ Devices
- Connect the Card to a Classic PLC-5 Processor
- Connect the Card to an Enhanced PLC-5 Processor
- Connect the Card to a Data Highway Plus Network
- Evaluate 1784-KTx Card Connection Options
- Connect the Card via a DH-485 Network
- Connect the Card to an SLC 500 Processor
- What to Do Next
- A - Run the 1784-KTx Card Diagnostics for Windows NT
- B - Run the 1784-KTx Diagnostics for DOS
- C - Use the KTx Card with 6200 Software
- Index
- Allen- Bradley Publication Problem Report
- Back Cover