Adherence to european union directive compliance – Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card User Manual
Page 3

iii
1784-6.5.22 - November 1999
Adherence to European Union Directive Compliance
If this product or package is marked with the CE mark, the product
complies with the following European Union Directives:
Installation Requirements: If this product is installed within the
European Union or EEA regions, the following regulations apply.
EMC Directive
This product is tested to meet Council Directive 89/ 336/EEC
Electromagnetic Compatibility (EMC) using a technical construction file
and the following standards, in whole or in part:
•
EN 50081- 2 EMC – Generic Emission Standard, Part 2 – Industrial
Environment
•
EN 50082- 2 EMC – Generic Immunity Standard, Part 2 – Industrial
Environment
The product described in this manual is intended for use in an industrial
environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/ 23/EEC Low Voltage,
by applying the safety requirements of EN 61131–2 Programmable
Controllers, Part 2 – Equipment Requirements and Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen- Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines, publication
1770- 4.1
•
Guidelines for Handling Lithium Batteries, publication AG- 5.4
•
Automation Systems Catalog, publication B111
This equipment is classified as open equipment and must be installed
(mounted) in an enclosure as a means of providing safety protection.