Rockwell Automation 1769-BOOLEAN Compact I/O Module Reference Manual - Manual (Page 27)

27 Publication 1769-RM016A-EN-P - July 2006
Chapter
2
Installation and Wiring
Overview This chapter tells you how to:
• determine the power requirements for the module.
• avoid electrostatic damage.
• install the module.
• wire the module’s terminal block.
• wire input devices.
• wire output devices.
Compliance to European
Union Directives This product is approved for installation within the European Union and EEA
regions. It has been designed and tested to meet the following directives.
EMC Directive
The analog modules are tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in whole
or in part, documented in a technical construction file:
• EN 61000-6-4:2001
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards -
Emission Standard for Industrial Environments
• EN 61000-6-2:2001
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards -
Immunity for Industrial Environments
This product is intended for use in an industrial environment.
Topic Page
Compliance to European Union Directives 27
Power Requirements 28
General Considerations 28
System Assembly 31
Mount the Module 32
Replace a Single Module Within a System 34
Field Wiring Connections 35
Wire the Module 38